Safety Cell

Safety Cell internal roll over protection systems are manufactured to the highest possible certification.

The compliance meets with the National code of practice -LK8 Ver2-Feb 09 and the National Mining code

1 The central hoop is correctly shaped and positioned.

2 Seat access is unobstructed,adequate driver and passenger space is retained and head space requirements are met.

3 Sufficient support points are provided.

4 All body components are properly fabricated.

No part of the installation interferes with correct use of seat belts or with operation or development of air bags.

5 All mounting plates are of the correct size and thickness.

6 At least three 10mm Grade 8.8 bolts and self locking nuts are used at each mounting point.

7 Tubing, including bent braces, is of the correct size and material.

8 Tubing is correctly padded where required and is of acceptable quality and density.